Secondary Feed Line
Automatic distribution with pans for direct bird feeding
Working Principle
The secondary feeding system takes feed from the main line and distributes it directly to the birds inside the hall. The process unfolds as follows:
- Feed is discharged into the reception hopper located at the end of the interior line
- The three-phase electric motor (380V) drives a flexible spiral (auger) inside the feeding tubes
- As the spiral rotates, feed is transported along the tube and falls through predefined openings directly into the feed pans
- At the end of the line, in the last pan, an intelligent sensor is installed. When the control pan fills up, the sensor automatically stops the motor. As birds consume feed and the level drops, the sensor commands system restart, ensuring permanently fresh feed without manual intervention
Product Description
Secondary lines with pans represent the standard and most efficient solution for feeding broiler chickens or floor-raised hens. The system is designed to provide easy access to feed from the first day of life to maturity, minimizing feed waste.
The use of premium components – such as hoppers with Al-Zn coating, durable plastic pans in various colors, South African spirals and European sensors – ensures a safe, hygienic and extremely durable feeding environment.
Performance and Technical Specifications
| Feature | Value |
|---|---|
| Reception Hopper Capacity | 60 kg or 80 kg |
| Hopper Material | Hot-dip galvanized sheet with Al-Zn coating, thickness 1.5 mm |
| Feed Tube Configuration | 3 openings per 3 meters OR 4 openings per 3 meters |
| Feed Pan Specifications | 14 or 16 grids, multiple color options (UV-treated and impact-resistant plastic) |
| Auger / Spiral | Premium quality, maximum torsion resistance |
| Motor Power Supply | Three-phase, 380V |
| Motor Power | 0.75 kW or 1.1 kW (depending on hall line length) |
| Motor Components | High-quality components |
| Level Sensor | High sensitivity to dust and humidity |
Product Advantages
Optimized pan design
Equipped with 14 or 16 dividing grids, the pans allow simultaneous feeding of multiple birds, preventing crowding and feed waste through scratching. Available in various color combinations (red, yellow, white) to stimulate bird appetite.
Uniform distribution
Tubes can be configured with 3 or 4 openings per 3-meter section, allowing adaptation of feeder density to your farm specifications.
Superior mechanical resistance
The interior spiral (auger) is imported from South Africa, recognized globally for extreme durability and wear resistance during continuous feed transport.
Top anti-corrosive protection
The feeding hopper is made from hot-dip galvanized steel with an additional Al-Zn layer, with a thickness of 1.5 mm, providing a much extended lifespan in the corrosive hall environment.
Installation Utilities Required
To put the secondary feed line into operation, you need:
- Three-phase electrical supply: 380V connection for each motor at the end of feeding lines
- Climate and feeding automation panel: To coordinate sensors with line motors
- Winch suspension system: The entire feeding line must be suspended on steel cables, connected to a winch (manual or electric), to allow height adjustment of pans as chicks grow, but also complete raising of lines during hall cleaning
